Vehicle Specifications
| Power Source: | Nitro Fuel |
|---|---|
| Terrain: | Off-Road |
| Body Style: | Buggy |
| Scale Size: | 1:8 Scale |
| Assembly Level: | Kit* |
| Length: | 488mm (19.21in) |
| Width: | varies |
| Wheelbase: | 327.5mm (12.89in) |
| Weight: | varies |
| Internal Gear Ratio: |
3.38:1 |
| Drive: | 4WD |
* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.
Required to Complete
- .21 class rear exhaust engine
- Exhaust system: muffler and header joining pack, or muffler spring (#28045 or #28049 recommended)
- 2-channel radio/transmitter set with switch - FM/PCM/2.4GHz recommended
- Transmitter batteries
- 4.8-7.4v receiver battery pack: 1) flat style NiMH battery; 2) either 1600mAh LiPo or 2100mAh LiPo or 1700 LiFe battery recommended
- Model car fuel (30% nitro recommended)
- Fuel bottle
- Glow igniter
- Starter box
- 1:8 scale buggy tires
- 1:8 scale buggy wheels
- CA (cyanoacrylic) glue
- Polycarbonate-specific spray paint or polycarbonate-specific bottled paint and airbrush
- Thread-locking compound
- Needle-nose pliers
- Hobby knife
- Reamer or hole punch for making holes in body
- Ride height gauge
- Steering servo
- Throttle servo
